TH3361SS316
GE* Actual product may vary from image
Designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the National Electrical Code. Certified to CSA standard 22.2 no. 4-04 enclosed and dead front switches. Meets or exceeds NEMA KS1 standard for enclosed switches, type HD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism. 60/75 C conductor rating. Full cover interlocks. NEMA type 4X enclosure grade 316 stainless steel. TH3361SS
Details
MFG PART #:TH3361SS316
TRC Part #:GEDITH3361SS316
UPC #:783164382310
Inventory
$4,011.04 E
Details
MFG PART #:TH3361SS316
TRC Part #:GEDITH3361SS316
UPC #:783164382310
Inventory
Attributes
Features
Documentation
Attributes
Brand:GE
Type:Type TH Heavy Duty Fused
Voltage Rating:600 VAC
Amperage Rating:30 A
HorsePower:7.5 hp, 3 hp, 5 hp, 15 hp, 10 hp, 20 hp, 2 hp
Phase:1 ph, 3 ph
Frequency Rating:50/60 Hz
Number Of Poles:3
Number of Wires:3
Short Circuit Current Rating:200 kA
Actuator Type:Donut Handle
Enclosure Type:NEMA 4/4X
Mounting Type:3-Point/Self-Leveling
Terminal Type:Line/Load Lug
Temperature Rating:60 to 75 deg C
Dimensions:10.1 in W x 9.4 in D x 13.3 in H
Material:316 Stainless Steel
Finish:Hot Dipped Galvanized/Powder Coated
Features
| Highly visible ON/OFF label takes the guesswork out of safety and gives a clean, modern appearance |
| Coin-proof, defeatable dual interlocks meet all safety inspection requirements |
| Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy |
| Three-point mounting pattern speeds installation and simplifies ganging in close quarters |
| Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts |
| Plated blades provide visible confirmation of contact position |
| Direct-drive, quick-make, quick-break mechanism "snaps" the contacts open and closed, providing positive ON/OFF indication while prolonging switch life |
| Spring-reinforced fuse clips assure reliable contact for cool operation |
| Suitable for class H, K, J or R fuses |
| 7.5 hp at 240 VAC time delay, 3 hp at 480 VAC standard fuse, 5 hp at 480 VAC standard fuse, 7.5 hp at 480 VAC time delay, 15 hp at 480 VAC time delay, 3 hp at 600 VAC standard fuse, 7.5 hp at 600 VAC standard fuse, 10 hp at 480 VAC time delay, 20 hp at 480 VAC time delay, 2 at 125 VDC, 5 at 250 VDC horsepower rating |