TH3362SS316
GE* Actual product may vary from image
Designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the National Electrical Code. Certified to CSA standard 22.2 no. 4-04 enclosed and dead front switches. Meets or exceeds NEMA KS1 standard for enclosed switches, type HD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism. 60/75 C conductor rating. Full cover interlocks. NEMA type 4X enclosure grade 316 stainless steel. TH3362SS
Details
MFG PART #:TH3362SS316
TRC Part #:GEDITH3362SS316
UPC #:783164382327
Inventory
$4,420.90 E
Details
MFG PART #:TH3362SS316
TRC Part #:GEDITH3362SS316
UPC #:783164382327
Inventory
Attributes
Features
Documentation
Attributes
Brand:GE
Type:Type TH Heavy Duty Dusttight Fused Standard Watertight
Voltage Rating:600 VAC, 125/250 VDC
Amperage Rating:60 A
HorsePower:10 hp, 15 hp, 25 hp, 50 hp
Phase:1 ph, 3 ph
Frequency Rating:50/60 Hz
Number Of Poles:3
Number of Wires:3
Short Circuit Current Rating:200 kA
Actuator Type:Donut Handle
Insulation Type:Class J/R
Enclosure Type:NEMA 4/4X
Mounting Type:3/4-Point Welded Bracket
Terminal Type:Line/Load Lug
Dimensions:9.4 in W x 5.2 in D x 19.3 in H
Material:316 Stainless Steel
Finish:Powder Coated
Features
Bright red "donut" handle molded from rugged SE1 noryl thermoplastic is easy to see, easy to grip and ideal for hook stick operation, it accepts 3-padlocks in OFF position |
Coin proof, defeatable dual interlocks meet all safety inspection requirements |
Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy |
3-point mounting pattern speeds installation and simplifies ganging in close quarters |
Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts |
Accessories, such as auxiliary switch kits, are UL Listed for quick and easy field installation (or they may be factory installed) |
Plated blades provide visible confirmation of contact position |
Direct drive, quick make, quick break mechanism "snaps" the contacts open and closed, providing positive ON/OFF indication while prolonging switch life |
Spring reinforced fuse clips assure reliable contact for cool operation, suitable for Class H, K, J or R fuses |
Cu/Al lugs are 60/75 deg C rated to permit greater wire selection |