Conduit Plugs & Caps
Remove All
Items 1 - 12 of 180
content loaded
T&B® 1451 Locking Knockout Plug, 1/2 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1451
T&B® 1452 Locking Knockout Plug, 3/4 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1452
T&B® 1453 Locking Knockout Plug, 1 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1453
T&B® 1454 Locking Knockout Plug, 1-1/4 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1454
T&B® 1455 Locking Knockout Plug, 1-1/2 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1455
T&B® 1456 Locking Knockout Plug, 2 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1456
Bridgeport® 341 Pull Cap, 1/2 in, For Use With EMT, Rigid, IMC Conduit and Most Bushing, Polyethylene
MFG Part #:341
Bridgeport® 342 Pull Cap, 3/4 in, For Use With EMT, Rigid, IMC Conduit and Most Bushing, Polyethylene
MFG Part #:342
Bridgeport® 343 Pull Cap, 1 in, For Use With EMT, Rigid, IMC Conduit and Most Bushing, Polyethylene
MFG Part #:343
Bridgeport® 344 Pull Cap, 1-1/4 in, For Use With Rigid/IMC/EMT Conduit and Bushing, Plastic
MFG Part #:344
CANTEX® 5140031 Non-Metallic End Cap, 1/2 in, For Use With SCH 40/80 Conduit, Type EB and DB Duct, PVC
MFG Part #:5140031
CANTEX® 5140032 Non-Metallic End Cap, 3/4 in, For Use With SCH 40/80 Conduit, Type EB and DB Duct, PVC
MFG Part #:5140032
T&B® 1451 Locking Knockout Plug, 1/2 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1451
T&B® 1452 Locking Knockout Plug, 3/4 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1452
T&B® 1453 Locking Knockout Plug, 1 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1453
T&B® 1454 Locking Knockout Plug, 1-1/4 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1454
T&B® 1455 Locking Knockout Plug, 1-1/2 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1455
T&B® 1456 Locking Knockout Plug, 2 in, For Use With Rigid/IMC Conduits, Thermoplastic
MFG Part #:1456
Bridgeport® 341 Pull Cap, 1/2 in, For Use With EMT, Rigid, IMC Conduit and Most Bushing, Polyethylene
MFG Part #:341
Bridgeport® 342 Pull Cap, 3/4 in, For Use With EMT, Rigid, IMC Conduit and Most Bushing, Polyethylene
MFG Part #:342
Bridgeport® 343 Pull Cap, 1 in, For Use With EMT, Rigid, IMC Conduit and Most Bushing, Polyethylene
MFG Part #:343
Bridgeport® 344 Pull Cap, 1-1/4 in, For Use With Rigid/IMC/EMT Conduit and Bushing, Plastic
MFG Part #:344
CANTEX® 5140031 Non-Metallic End Cap, 1/2 in, For Use With SCH 40/80 Conduit, Type EB and DB Duct, PVC
MFG Part #:5140031
CANTEX® 5140032 Non-Metallic End Cap, 3/4 in, For Use With SCH 40/80 Conduit, Type EB and DB Duct, PVC
MFG Part #:5140032