EYF125AL
Appleton®* Actual product may vary from image
UNILETS EY Series 25 PCT Fill Vertical And Horizontal Conduit Sealing Fitting, Size: 1-1/4 IN, Material: Almag 35 Aluminum, Finish: Epoxy Powder Coat, Connection: Female Threaded, Turning Radius: 1-3/4 IN, Length: 4.94 IN, Width: 2 IN,
Details
MFG PART #:EYF125AL
TRC Part #:EGSMEYF125AL
UPC #:781381600019
Inventory
$51.35 E
Details
MFG PART #:EYF125AL
TRC Part #:EGSMEYF125AL
UPC #:781381600019
Inventory
Attributes
Features
Documentation
Attributes
Brand:Appleton®
Dimensions:4.94 in L x 2 in W
Finish:Epoxy Powder Coated
Material:Almag 35 Aluminum
Size:1-1/4 in
Suitable For Use With:IMC/Threaded Rigid Metallic Conduit
Type:Dust-Ignitionproof Explosionproof Raintight
Series:EY Series
Features
| Smooth, rounded integral bushing in each hub to protect conductor insulation |
| Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity |
| Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub |
| Restrict any explosion to the sealed off enclosure |
| Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures |
| Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps |
| Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location |
| Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure |
| Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations |
| 25% fill vertical and horizontal conduit sealing fittings for close turning radius |