KPSTH10150GMT
Appleton®* Actual product may vary from image
Details
MFG PART #:KPSTH10150GMT
McMc Part #:EGSMKPSTH10150GMT
UPC #:781381015462
Inventory
$1,592.38 E
Details
MFG PART #:KPSTH10150GMT
McMc Part #:EGSMKPSTH10150GMT
UPC #:781381015462
Inventory
Attributes
Features
Documentation
Attributes
Brand:Appleton®
Amperage Rating:1.2/0.7/0.61/0.55 A Starting, 1.15/0.7/0.58/0.5 A Operating
Ballast Type:HX-HPF
Dimensions:17.23 in L x 11 in W
Enclosure Type:NEMA 4X/IP66
Housing Finish:Epoxy Powder Coated
Housing Material:Aluminum
Lamp Type:Pulse Start Metal Halide
Lamp Wattage:100 W
Lens Type:Prismatic Glass
Mounting Type:Stanchion
Voltage Rating:120/208/240/277 VAC
Series:KP Series
Fixture Wattage:130 W
Number of Lamps:1
Lamp Base Type:Mogul
Features
| Modular design allows scores of fixture component combinations to meet installation and lighting needs and many most-used combinations are offered prewired and assembled, complete with lamp, packaged in a single carton and ready to install |
| Choice of heat-resistant prismatic glass refractors (NEMA distributions I, III and V), or heat-resistant prismatic glass globes for hazardous area fixtures |
| Colored and clear polycarbonate globes and Tuff-skin® coated glass globes are available but are NOT approved for use in classified areas |
| Fixtures with these globes do NOT comply with code requirements, and should be used in non-classified areas only |
| Globes and refractors thread directly into ballast housing |
| Mounting hoods include cone-shaped pendant hood, standard pendant, flexible pendant, ceiling and wall pendants (tapped for 3/4 in or 1 in NPT), 25 deg angle stanchion, and 90 deg (straight) stanchion (both tapped for 1-1/4 in or 1-1/2 in NPT) |
| Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers, cone hood inhibits build-up that "insulates" fixture and slows heat transfer, and provides increased surface area for more effective heat dissipation |
| Reflector choice includes standard dome and 30 deg angle types, both made of fiberglass reinforced white polyester, highly resistant to unusually corrosive applications |
| Reflectors are vented for cooler, dirt-free operation and maintained lumen output, they secure to ballast housing with stainless steel screws threading into stainless steel inserts |
| For high corrosion resistance, fixture housing, mounting hoods and guards are copperfree cast aluminum with baked epoxy finish, electrostatically applied for uniformity, all exposed hardware is stainless steel |