THED113030WL
GE* Actual product may vary from image
Thermal-Magnetic Trip. E150 Line Circuit Breakers. Noninterchangeable Trip. Includes Cu/Al load lugs only. If line lugs are required, add suffix (WL÷ to Product Number. UL listed for HID (high intensity discharge). All TEB, TED, THED breakers UL listed as HACR type except 10 ampere. All TEB, TED, THED breakers suitable for reverse feed. 60/75 C rating through 100 amperes, 75 C rating above 100 amperes. TED CIRCUIT BREAKER (HI-BREAK)
Details
MFG PART #:THED113030WL
TRC Part #:GEDITHED113030WL
UPC #:783164236958
Inventory
$1,250.33 E
Details
MFG PART #:THED113030WL
TRC Part #:GEDITHED113030WL
UPC #:783164236958
Inventory
Attributes
Features
Documentation
Attributes
Brand:GE
Type:Type THED Core E High Tier
Voltage Rating:277 VAC
Amperage Rating:30 A
Frequency Rating:50/60 Hz
Interrupt Rating:14 kA
Frame:E150
Trip Type:LI/Non-Interchangeable Thermal Magnetic
Number Of Poles:1
Phase:1 ph
Actuator Type:Pivot/Toggle Handle
Connection Type:Line/Load Lug
Wire Size:10 to 8 AWG
Temperature Rating:10 to 50 deg C
Dimensions:1-3/8 in W x 3-3/8 in D x 6-5/16 in H
Material:Plastic
Features
Molded case is molded from high mechanical and high dielectric strength engineered plastic |
Trip indication is shown by handle position midway between ON and OFF, to reset the trip mechanism, move the handle to extreme OFF, then to ON position |
Quick make, quick break, trip-free mechanism minimizes arcing during breaker operation, contacts cannot be ''teased'' into position |
Trip-free mechanism is independent of manual handle control, the breaker trips under short circuit or overload, even though the operating handle is held in ON position |
VERIFIER™ twist-to-trip and ''push-to-trip'' mechanically simulates over current tripping through actuation of linkages not operated by the on-off handle |
Common trip bar assures instant disconnect of all conductors when an overload or short circuit occurs on any one conductor in the circuit or an accessory trip device operates |
Silver alloy contacts combine the conductive properties of silver with other elements for clean, positive electrical contacting, pitting and burning are minimized for longer contact life |
Arc chutes of heat absorbing, insulating material and metal grid plates quickly ''extinguish'' arcs |
UL listed lugs for copper or aluminum cable, at full frame rating, easy access and simple, straight-in wiring |
Proven reliability |