THQL1125
GE* Actual product may vary from image
THQL 1 POLE 120/240V 10K IC 25 AMP
Details
MFG PART #:THQL1125
TRC Part #:GEDITHQL1125
UPC #:783164131628
Inventory
$Ā E
Details
MFG PART #:THQL1125
TRC Part #:GEDITHQL1125
UPC #:783164131628
Inventory
Attributes
Features
Documentation
Attributes
Brand:GE
Actuator Type:Pivot/Toggle Handle
Amperage Rating:25 A
Connection Type:Load Lug
Dimensions:3-9/32 in H x 2 in W x 2-3/8 in D
Frame:Q-Line
Frequency Rating:50/60 Hz
Interrupt Rating:10 kA
Material:Plastic
Mounting Type:Plug-In
Number of Poles:1
Phase:1
Temperature Rating:10 to 50 deg C
Trip Type:Non-Interchangeable Thermal Magnetic/LI, Thermal Magnetic
Type:Type THQL Compact
Voltage Rating:120/240 V AC, 120/240 VAC
Wire Size:14 to 8 AWG, 12 to 8 AWG
Features
| Molded case is molded from high mechanical and high dielectric strength engineered plastic |
| Trip indication is shown by handle position midway between ON and off to reset the trip mechanism, move the handle to extreme off then to ON position |
| Quick-make, quick-break, trip-free mechanism minimizes arcing during breaker operation, contacts cannot be ''teased'' into position |
| Trip-free mechanism is independent of manual handle control, the breaker trips under short circuit or overload, even though the operating handle is held in on position |
| VERIFIERā¢ "twist-to-trip" and ''push-to-trip'' mechanically simulates over current tripping through actuation of linkages not operated by the on-off handle |
| Common trip bar assures instant disconnect of all conductors when an overload or short circuit occurs on any one conductor in the circuit or an accessory trip device operates |
| Silver alloy contacts combine the conductive properties of silver with other elements for clean, positive electrical contacting, pitting and burning are minimized for longer contact life |
| Arc chutes of heat absorbing, insulating material and metal grid plates quickly ''extinguish'' arcs |
| UL listed lugs for copper or aluminum cable, at full frame rating, easy access and simple, straight in wiring |
| 10 kA at 120 VAC, 10 kA at 120/240 VAC interrupt rating |