ODS15-IDI
Leviton®* Actual product may vary from image
Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, Self-Adjusting, Ivory
Details
MFG PART #:ODS15-IDI
TRC Part #:LEVIODS15IDI
UPC #:078477010235
Inventory
$ E
Details
MFG PART #:ODS15-IDI
TRC Part #:LEVIODS15IDI
UPC #:078477010235
Inventory
Attributes
Features
Documentation
Attributes
Brand:Leviton®
Type:1-Pole Low-Profile Photocell Controlled Single Relay
Voltage Rating:120/230/277 VAC
Power Rating:100/280 mW
Sensor Type:PIR
Coverage:2100 sq-ft
Viewing Angle:180 deg
Time Delay:30 s to 20 min
Lamp Type:Fluorescent/Incandescent
Response Frequency:50/60 Hz
Control Output:Manual On/Automatic Off
Mounting Type:Wall
Temperature Rating:0 to 50 deg C
Color:Ivory
Dimensions:46 in H x 1.75 in W x 1.83 in D
Features
| Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units |
| Low profile design eliminates obtrusive "scanning device" look |
| Convenient pushbutton provides manual ON/OFF light switching at any time |
| Two dual element PIR sensors used to widen detection range, relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts |
| Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected |
| Vandal resistant PIR lens, 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts |
| Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required |
| Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings |
| To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active |
| Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10 and 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min |