EYAX100
O-Z/Gedney* Actual product may vary from image
OZ-Gedney Type EYAX Vertical/Horizontal Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2 IN Body Diameter X 5-1/16 IN Overall Length, 1-7/8 IN Turning Radius, 6 OZ Sealing Compound Required, 1/4 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, CSA 009795 Suitable For Wet Locations, UL Listed Using: O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, CSA Certified Sealing Compound, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC
Details
MFG PART #:EYAX100
TRC Part #:EGSMEYAX100
UPC #:783126113952
Inventory
$109.54 E
Details
MFG PART #:EYAX100
TRC Part #:EGSMEYAX100
UPC #:783126113952
Inventory
Attributes
Features
Documentation
Attributes
Brand:O-Z/Gedney
Type:Type EYAX Dust-Ignitionproof Explosionproof Horizontal Vertical
Size:1 in
Suitable For Use With:IMC/Rigid Metal Conduit
Material:Malleable Iron
Finish:Electroplated Zinc
Dimensions:2 in Dia x 5-1/16 in L
Features
To seal vertical or horizontal conduit runs where 40 PCT conductor fill is required |
To minimize the passage of gases and vapors and prevent the passage of flames from one portion of the electrical system to another through the conduit |
Use with type EYC sealing compound and type EYF fiber |
Prevent passage of gases, vapors or flames from one portion of conduit system to another |
Restrict any explosion to the sealed off enclosure |
Prevent pressure piling within conduit system |
Required in class I, division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures |
Required in class I, division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps |
Required in class I, division 1 and 2 locations at the boundary where conduit leaves classified location |
Required in class I, division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure |