PLX31-EIP-MBS4
ProSoft Technology* Actual product may vary from image
ProSoft Technology PLX31-EIP-MBS4 EtherNet/IP to Modbus Serial Gateway, Modbus Slave Protocol, 50/60 Hz
Details
MFG PART #:PLX31-EIP-MBS4
TRC Part #:PRTEPLX31EIPMBS4
Inventory
$ E
Details
MFG PART #:PLX31-EIP-MBS4
TRC Part #:PRTEPLX31EIPMBS4
Inventory
Attributes
Features
Attributes
Brand:ProSoft Technology
Protocol:Modbus Slave
Frequency Rating:50/60 Hz
Port Type:Serial
Number of Ports:4
Dimensions:5.38 in H x 1.99 in W x 4.38 in D
Environmental Conditions:5 to 95% Humidity
Features
| 10 to 36 VDC allowed positive, negative, GND terminals power supply |
| -25 to 70 deg F operating temperature |
| Configuration (CFG) and error (ERR) communication status, power (PWR) and hardware fault (FLT), network status (NS) EtherNet/IP class I or class III connection status, module status (MS) module configuration status, EtherNet communication port link/activity and 100mbit, serial communication port receive (RX) and transmit (TX) LED indicators |
| The number of serial communication ports depends on the gateway type, and the combination of protocols serial port |
| 10/100 base-T half duplex RJ45 connector electrical isolation 1500 Vrms at 50 Hz to 60 Hz for 60 sec EtherNet port |
| EtherNet broadcast storm resiliency is equal to less than or equal to 5000 [ARP] frames/sec and less than or equal to 5 min duration |
| 10/100 Mb EtherNet port with auto cable crossover detection |
| 2500 Vrms port signal isolation per UL 1577, 3000 VDC minimum port to ground and port to logic power isolation serial port isolation |