6ATC2PGY
Wiremold®* Actual product may vary from image
For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, (BZ) bronze, and (AL) aluminum. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Finish - Gray
Details
MFG PART #:6ATC2PGY
McMc Part #:WMLD6ATC2PGY
UPC #:786564088806
Inventory
$994.99 E
Details
MFG PART #:6ATC2PGY
McMc Part #:WMLD6ATC2PGY
UPC #:786564088806
Inventory
Attributes
Features
Documentation
Attributes
Brand:Wiremold®
Capacity:24 cu-in
Color:Gray
Depth:16-3/4 in
Device Type:Fire-Rated
Finish:Powder Coated
Knockout Size:3/4 to 2 in
Length:7-1/4 in
Material:Plastic/Steel
Number of Gangs:3
Suitable For Use With:Carpet, Tile, Wood, Terrazzo, Polished/Finished Concrete Floor
Type:Multi-Service Pre-Wired Recessed
Width:7-1/4 in
Series:Evolution™ 6AT
Hole Size:6 in
Cover Material:Die Cast Aluminum
Features
| Pre-wired assembly save on labor with a completely assembled, Pre-wired poke-thru with every power receptacle already installed |
| Recessed devices provide maximum protection - all power, communications and AV devices are recessed below floor level, providing maximum protection and device longevity |
| Step-on-it installation - quick and easy installation without the need for additional fasteners or a second installer |
| The cover opens a full 180 deg with two unique spring-loaded slide egress doors to keep wires, connections and people safe |
| Flush tile version cover assemblies - a flush style cover for tile applications allows the Evolution™ series poke-thru devices to be adjusted to the same level as the top surface of the floor covering |
| Open system for expanded compatibility - accepts industry standard power, communications and A/V devices from most manufacturers including Legrand AVIP, Extron® and more |
| Plug load control up to 30 ft - tested with Pass & Seymour® wireless RF receptacles to control plug loads up to a distance of 30 ft when the cover is closed |
| Evolution™ series poke-thru devices use an intumescent material that maintains the fire rating of any floor for up to 2 hr |