8ATC2PBK
Wiremold®* Actual product may vary from image
For carpet, tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, (BZ) bronze, and (AL) aluminum. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.), Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Finish - Black
Details
MFG PART #:8ATC2PBK
TRC Part #:WMLD8ATC2PBK
UPC #:786564089858
Inventory
$ E
Details
MFG PART #:8ATC2PBK
TRC Part #:WMLD8ATC2PBK
UPC #:786564089858
Inventory
Attributes
Features
Documentation
Attributes
Brand:Wiremold®
Type:Pre-Wired Recessed
Series:Evolution™ 8AT
Hole Size:8 in
Knockout Size:3/4 to 2 in
Number of Gangs:5
Capacity:24.5 cu-in
Device Type:Fire-Rated
Length:9-1/4 in
Width:9-1/4 in
Depth:16-3/4 in
Suitable For Use With:Carpet, Tile, Wood, Terrazzo, Polished/Finished Concrete Floor
Cover Material:Die Cast Aluminum
Material:Plastic/Steel
Color:Black
Finish:Powder Coated
Features
| Pre-wired assembly save on labor with a completely assembled, Pre-wired poke-thru with every power receptacle already installed |
| Recessed devices all power, communications and AV devices are recessed below floor level, providing maximum protection and device longevity |
| Step-on-it installation - quick and easy installation without the need for additional fasteners or a second installer |
| The cover opens a full 180 deg with two unique spring-loaded slide egress doors to keep wires, connections and people safe |
| A surface style cover is for mounting on top of the finished floor surface |
| Open system for expanded compatibility - accepts industry standard power, communications and A/V devices from most manufacturers including Legrand AVIP, Extron® and more |
| Includes 3-gang opening designed to fit A/V devices, including wall plate style transmitters, like the Crestron DM/TX series, without any additional parts |
| Plug load control up to 30 ft - tested with Pass & Seymour® wireless RF receptacles to control plug loads up to a distance of 30 ft when the cover is closed |
| Evolution™ series poke-thru devices use an intumescent material that maintains the fire rating of any floor for up to 2 hr |
| The poke-thru trim flanges are beveled so the slope is no greater than 1:2 ratio |