The Reynolds Company
Company Logo

Ready to Work with FactoryTalk Design Workbench

11/16/2026

Small machines shouldn’t require a large engineering effort, but programming them often does. Teams building standalone machines on Micro800™ controllers have typically used separate tools to program the controller, configure drives, and troubleshoot equipment. If you are used to operating in Studio 5000 Logix Designer® every day, it can be difficult to switch to an entirely different interface for your smaller machines. Additionally, tracing problems across several controllers takes time, and changing logic can mean stopping the machine.

FactoryTalk® Design Workbench™ from Rockwell Automation® is a free PLC programming software tool built to address these challenges. It is designed for commissioning and maintaining Micro800 controllers, including the Micro810®, Micro820® L20E, Micro850® L50E, and Micro870® L70E in Ladder Diagram (LD), Structured Text (ST) and Function Block Diagram (FBD). Its layout will feel familiar to Logix users, and it offers faster uploads and downloads, connection to multiple controllers at once, and online editing.

How do I use FactoryTalk Design Workbench?

The FactoryTalk Design Workbench Getting Results Guide from Rockwell Automation outlines this basic workflow:

  1. Power and wire the controller and I/O.
  2. Install the software from the Product Compatibility and Download Center (PCDC), then connect your computer to the controller.
  3. Create a new project and add your controller. If the controller is already connected, use Discover device to add it, upload from it, and connect in one step.
  4. Configure the controller, I/O, plug-in modules, and expansion modules, and set a controller password.
  5. Add programs and variables, then write logic in LD, ST, or FBD.
  6. Build the project and resolve any errors shown in the Error list.
  7. Connect, download the project, and change the controller mode to Run. On Micro820, 850, and 870 controllers, use Run Mode Change to make online edits without stopping the machine.
  8. Monitor variables and use the Diagnose and Fault tools while commissioning and troubleshooting.

What’s new for FactoryTalk Design Workbench Version 2?

Rockwell Automation has announced these additions for Version 2:

  • Application simulation, so you can test and validate logic without connecting to hardware
  • A code editor that converts neutral-text programming into ladder diagrams
  • Code reuse from Connected Components Workbench™ (CCW), RSLogix 500®, and Studio 5000 Logix Designer
  • Real-time variable monitoring across multiple controllers
  • Integrated controller backup and restore through FactoryTalk AssetCentre software
  • Device management for PowerFlex® 535 drives
  • A simpler migration path from CCW and Micro800 programs, versions 22 and 23

Together, these changes let you test logic earlier, build on existing code, and work more closely with the rest of the FactoryTalk software portfolio.

Questions or Requests

If you build or maintain small machines and have questions about whether FactoryTalk Design Workbench is right for your control system, contact your account manager with The Reynolds Company.